| 1. | Reporting cure times of ultraviolet - cured coatings
紫外线固化涂料固化时间的报告 |
| 2. | Test method for determining stroke cure time of thermosetting phenol - formaldehyde resins
热固性酚醛树脂冲击固化时间的测定 |
| 3. | Curing time lag
硫化时间滞后 |
| 4. | It are general purposed , are easy to control the gel time , it have good color , good puriety , cured time is stable
过氧化环已酮h4份(或过氧化甲乙酮m ) 2份 |
| 5. | Effect of hot - pressing temperature and natural curing time on properties of fast - curing cement particle board
热压温度和养护时间对快速固化水泥刨花板性能的影响 |
| 6. | During this curing time paint manufactures recommend not to apply a " wax " or " protectant " to the finish
在整修期间，漆面制造厂建议，不要使用打蜡或使用保护剂。 |
| 7. | 7 glue in fixed protection / anchors must be checked and moderately load tested sometime after the recommended curing time
7固定支点上的黏著剂经建议时间而凝固后，应对其进行确认并进行适度的负重测试。 |
| 8. | The influence of climate , service condition and curing time on durability is analyzed . the relationship between cost and estimative failure cost is discussed
研究了结构耐久性与气候、使用环境、养护时间的关系，以及估算失效费用对结构成本的影响。 |
| 9. | Through above experiment , it would be expected to shorten port wine stain cure time and use them in curing degeneration of macula
通过上述实验，试图缩短鲜红斑痣的治疗时间，另外期望在需更强的杀伤效应的光敏剂才能完成的老年黄斑变性的治疗方面能得到应用。 |
| 10. | The curing time of the modified pf resin and the adhesive strength and emission of formaldehyde of the plywood bonded with this modified pf resin was measured in this paper
结果表明:紫胶改性酚醛胶的固化时间与普通酚醛胶接近,粘接胶合板的粘接强度达到类胶合板的要求,胶合板的甲醛释放量降低。 |
